Ilverford Faceted Alabaster Drop Chandelier
Pairs well with
Product Description
The Ilverford Faceted Alabaster Drop Chandelier pairs a solid metal cone cap with a tapered. faceted alabaster point below it. meeting at their widest point so light exits through the narrowing stone tip as a concentrated. warm spill rather than a broad wash. It's offered as a single drop. or gathered into a 3-. 5-. 7-. 9-. or 12-light cluster. each cone hung on its own cord from a shared ceiling canopy — trim the cords to different lengths at installation to hold the cluster close and level. spread it wider across the ceiling. or let it fall in a diagonal cascade down a stairwell. Available in Black or Brass hardware.
Faceted cone-and-point shade
A solid metal cone cap meets a tapered. faceted alabaster point at their widest edge. narrowing to a single tip below where the light glows out in a concentrated. warm spill.
Staggered cords. shared canopy
Each cone hangs on its own cord from a shared ceiling canopy. Trimming each cord to a different length at installation lets you gather the cluster close. spread it wider. or cascade it on a diagonal.
Six sizes. two finishes
Available as a 1-. 3-. 5-. 7-. 9-. or 12-light configuration. in Black or Brass hardware. to suit spaces of different scale.
Black
Metal cone cap and ceiling canopy in a matte black finish.
Brass
Metal cone cap and ceiling canopy in a warm brass finish.
1 Light — Φ11 × H30 cm
A single cone-and-point drop on a fixed 50 cm cord. suited to a bedside drop. powder room. or beside a mirror — or order two or three separately and space them yourself.
3 Lights — Canopy Φ15 cm
The tightest cluster. suited to a breakfast nook. small round table. or stair landing.
5 Lights — Canopy Φ20 cm
Our most chosen configuration — suited to a round dining table. entry hall. open stairwell. or kitchen island.
7 Lights — Canopy Φ30 cm
Suited to a larger dining table. double-height entry. or open-plan living room.
9 Lights — Canopy Φ35 cm
Suited to a stairwell void. two-story foyer. long dining table. or atrium.
12 Lights — Canopy Φ40 cm
Our grandest configuration. suited to a grand entry. three-story stairwell. hotel or restaurant. or banquet table.
| 1 Light | Shade Φ11 × H30 cm / Φ4.3″ × H11.8″. on a fixed 50 cm / 19.7″ cord |
| 3 Lights | Canopy Φ15 cm / Φ5.9″. cords 150 cm / 59″ each before trimming |
| 5 Lights | Canopy Φ20 cm / Φ7.9″. cords 150 cm / 59″ each before trimming |
| 7 Lights | Canopy Φ30 cm / Φ11.8″. cords 150 cm / 59″ each before trimming |
| 9 Lights | Canopy Φ35 cm / Φ13.8″. cords 150 cm / 59″ each before trimming |
| 12 Lights | Canopy Φ40 cm / Φ15.7″. cords 150 cm / 59″ each before trimming |
| Lights | 1 × G9 socket per cone |
🔍 Click any diagram to enlarge
| Product Name | Ilverford Faceted Alabaster Drop Chandelier |
| Product Type | Multi-Drop Alabaster Cone-and-Point Chandelier. Staggered Cords. 6 light-count options |
| Material | Natural Alabaster (tapered. faceted point. hand-cut and hand-polished). Metal (cone cap and canopy. electroplated finish) |
| Finish Options | Black or Brass; alabaster color and veining vary randomly per piece and cannot be specified |
| Size Options | 1. 3. 5. 7. 9. or 12 lights (see Dimensions for canopy size per configuration) |
| Cord Length | 150 cm / 59″ per cone (3- through 12-light clusters). trimmable on site to different lengths; single-light version on a fixed 50 cm / 19.7″ cord |
| Light Source | G9 bulb (small two-pin capsule. not a screw base) — LED recommended over halogen since the bulb sits enclosed with little airflow |
| Power | Max 40W per socket |
| Voltage | AC 110–240V |
| Control | Wall switch; dimmable only if every socket is fitted with a dimmable G9 bulb and paired with a compatible dimmer switch — standard bulbs do not dim |
| Mounting | Ceiling. hardwired to a standard junction box; cords exit from fixed points on the canopy |
| Environment | Indoor only |
| Suitable Spaces | Stairwell. multi-story foyer or atrium. dining table. kitchen island. bedside |
- Mount to a secure ceiling junction box using hardware suitable for the fixture weight; installation is hardwired and should follow local electrical requirements.
- On multi-light clusters. hang all cords at full length first. then shorten one at a time to set the final gathered. spread. or cascading pattern — cords exit from fixed points on the canopy and can't be repositioned.
- Never lift a cone by its cord — it is not load-bearing. and tension on it can strain the socket wiring over time.
- Always support each alabaster cone directly when moving or installing; for the larger. multi-light configurations. two people are strongly recommended.
- Dust with a soft. dry cloth. Avoid water. solvents. and abrasives. which will dull the polished surface irreversibly.
- Do not exceed the fixture's rated 40W per socket. LED G9 bulbs are recommended over halogen. since each bulb sits enclosed inside the stone point with little airflow and LED runs far cooler.
- Natural alabaster will show variation in color and veining between units — this is expected and not a defect.
- Disconnect power before changing a bulb or servicing the fixture.
- Intended for indoor. dry use only.
Return Policy
Please inspect your order as soon as it arrives. If your items are damaged in transit, incorrectly shipped, defective, or simply do not meet your expectations, please email us at contact@relicpieces.com within 30 days of delivery.
Secure Payment
Shop with confidence using our secure payment options. We accept PayPal and all major credit cards (VISA, Mastercard, AMEX, etc.). Your personal and financial details are fully protected by advanced SSL encryption.
Lamp Knowledge Science
*A general explanation of the product features for all lighting fixtures. It doesn't mean the product on the current page is dimmable or three colours changeable.
Please check the Description section to find whether the current product is dimmable or not.
- Dimmable version: equipped with a remote control, and can adjust the brightness and colour temperature of the light, not compatible with dimmers.
- Triac Dimmable (Wall Switch Control): Compatible with most standard LED silicon-controlled (Triac) wall dimmers(not included). This version allows you to adjust brightness via your existing wall switch but does not include a remote.
- Three-colour changed by switch version: Controlled by a standard wall switch(not included), allowing you to adjust the color temperature of the light. This version does not have a memory function. Each time the light is turned on, it will reset to the default setting.
Size Tolerance Notice:
All dimensions are manually measured. Due to the unique shapes or craftsmanship of certain lighting fixtures, a deviation of 1-3cm is within the normal range. Please refer to the actual product received for precise installation.
Colour Disclaimer:
Actual colours may vary slightly due to different monitor settings, room ambient light, or the colour temperature of the bulbs used. We appreciate your understanding.
Ilverford Faceted Alabaster Drop Chandelier